HQ RISE · Application testing

Laser sample testing: what to send before choosing a machine

A brochure material list is a starting point. A useful test uses representative parts and a clearly defined result. This checklist helps prepare a marking or thin-metal welding enquiry before the final equipment configuration is agreed.

1. Identify the actual material

Provide the material grade, thickness or dimensions, surface finish and coating. A description such as “plastic” or “stainless steel” is often too broad to define a test. Use parts that reflect the intended production material and tell the team about any variation between batches.

For marking, include the artwork, text, logo or code and the required marking field. For welding, provide the strip width, thickness and intended joint geometry. Tell the team whether the sample has already been processed, painted or plated.

2. Define what counts as an acceptable result

Marking testWelding test
Required contrast and appearanceRequired joint appearance
Legibility of text, logos or codesDimensional or alignment requirements
Position and size of the markStrength or other acceptance criteria specified by the buyer
Any surface or part constraintsMaterial, coating and process constraints

Agree how the result will be evaluated. If you require a particular inspection or test, discuss the method and whether it can be included before sending samples. A photograph alone does not demonstrate every production acceptance criterion.

3. Match the test to the correct machine

The HQ Series fiber laser marking machine is intended for identification and surface-marking applications. Its brochure lists 20, 30, 50 and 100 W options and a standard 100 × 100 mm marking field.

The HQ-MT1500-I precision laser welding machine is intended for automatic butt welding of thin metal strips. Its published range is 0.03–0.5 mm material thickness with width below 130 mm. A test for a different joint or thicker material should not be assumed to validate this platform.

4. Discuss quantity and shipping before dispatch

Confirm how many representative samples are needed, the receiving address and who handles shipping and return arrangements. Include the company name and a contact who can clarify technical requirements. Buyers in Southeast Asia should give the actual destination country so the enquiry can include relevant delivery questions.

Do not send samples to an address inferred from a general company location. Agree the receiving details directly with the team and label the samples so each can be matched to its material description and test objective.

5. Review the result and final configuration

Compare the sample result with the acceptance criteria, rather than only checking whether a mark or joint was produced. Ask which configuration was used and what still needs confirmation for your intended production conditions. Discuss output requirements, operator guidance and maintenance in the quotation.

See the original brochure sample gallery, factory and sample-testing services, and marking-versus-welding buying guide.

This is a buyer preparation checklist. Machine specifications and brochure examples refer to the supplied HQ RISE / Huaqiyun materials; the checklist does not promise a particular testing method, turnaround time or result.