HQ RISE · Marking equipment selection

How to choose a fiber laser marking machine for your parts

Start with the material, the required mark and the production cycle. The HQ Series offers 20 / 30 / 50 / 100 W options with a published standard marking field of 100 × 100 mm. A power rating alone does not establish the result on your part.

Prepare a useful marking enquiry

Selection pointInformation to provideWhat to check in the sample
Material and finishExact alloy or plastic grade, coating and surface finishContrast, edge quality and surface changes
Mark contentLogo, text, serial number or code artwork at actual sizeReadability and the smallest required features
Part geometryDimensions, marking location and access photosPositioning and fixture requirements
Production targetParts per shift and available marking timeFull cycle including loading and unloading
Acceptance criteriaApproved appearance sample and any required checksRepeatable results on representative parts

20 W, 30 W, 50 W or 100 W: which should you request?

Ask for a configuration recommendation against your sample and cycle-time target. Do not choose solely by wattage: confirm the laser source, lens, working field, fixture and settings used for the demonstrated result. No fixed engraving depth or production speed is promised for these power options on this page.

If the artwork exceeds the standard 100 × 100 mm field, provide its dimensions before requesting a quotation. Confirm any alternative lens or positioning arrangement and test the smallest details at the required field size.

Match the test to the surface

The supplied brochure shows anodized aluminum marking, plastic component identification and paint removal on buttons. These examples are a starting point for testing; they do not establish that all plastics or coatings behave the same way.

  • Anodized aluminum: provide the actual color and finish, then agree on contrast and appearance.
  • Plastic parts: identify the resin grade and additives if known, and test the actual component.
  • Painted components: define which layer should be removed and which surface must remain intact.
  • Identification codes: supply the actual artwork and reader requirements; agree on a readability test.

See the brochure sample gallery and sample-testing checklist.

Buying for a Southeast Asian workshop or factory

Include your destination country, installation conditions, available power supply and operator language in the enquiry. Ask for written confirmation of packing, delivery terms, training, support and any required documents. Local installation or service availability must be confirmed in the quotation.

Discuss the laser enclosure, interlocks, extraction and operator protection required for your installation with the supplier and your site safety team before purchase.

Request a configuration based on your part

Send a part photo, material grade, artwork dimensions, daily output target and destination country. Ask for sample images or video, the tested configuration and the observed cycle time.

View HQ Series specifications · Request a sample review and quotation · Browse all buying guides

Equipment options and standard field are from the supplied HQ RISE brochure. The remaining checklist describes information to confirm during application review, rather than tested performance claims.